Cobalt base amorphous rotor core. It has the highest permeability in all amorphous alloy rotor cores, and at the same time has medium low saturation magnetic induction, low stiffness, low wear, excellent wear resistance and corrosion resistance, and good temperature stability. Time stability, impact vibration resistance. It is mainly used to replace Mohejin rotor core and ferrite rotor core to produce high-frequency Transformers, filter inductors, magnetic amplifiers, Pulse Transformers, Pulse compressors and other applications in the high-end field.
Microcrystalline core. High saturated magnetic induction, high magnetic conductivity, low coercive force, low loss and good stability, wear resistance, corrosion resistance, and low price, with the best value for money in all metal soft magnetic material cores, Materials used to make micro-crystal fixed rotor cores are known as green materials. Widely used in replacing Silicon steel, Mohejin and ferrite, as various forms of high frequency(20KHz 100KHz) switch power main Transformers, control Transformers, wave inductors, energy storage inductors, reactors, magnetic amplifiers and saturated reactors set rotor iron cores, EMC filter common inductance and differential mode electrosensing rotor core, IDSN micro-isolation Transformer fixed rotor core; It is also widely used in various kinds of inductors with similar accuracy.

The fixed rotor iron core is a series of collective names of fixed rotor iron cores. Various types of Pomeranian alloy materials have their own different, superior typical magnetic properties than Silicon steel materials and ferrite, and have higher temperature stability and aging stability. High initial magnetic conductivity slope type alloy material fixed rotor core is often made current Transformer, small signal Transformer; The fixed rotor core is often made of high moment-shaped slope type alloy material, magnetic amplifier, dual pulse Transformer; Low residual magnetic Pomeranian alloy material fixed rotor core is often produced medium and low power single-polar pulse Transformers. The following is a small compilation for you to introduce the common type of fixed rotor core.
Iron base amorphous rotor core. It has the highest saturated magnetic induction in almost all amorphous alloy rotor cores, and at the same time has high permeability, low rigidity, low loss, low excitation current and good temperature stability and aging stability. Mainly used as a substitute for Silicon steel sheets, as various forms of power frequency distribution Transformers, intermediate frequency Transformers, operating frequencies from 50Hz to 10KHz; As a high-power switch power reactor rotor core, the use frequency can reach 50KHz.
Iron-nickel-based amorphous rotor core. Medium low saturated magnetic induction, high magnetic conductivity, low coercive force, wear resistance and corrosion resistance, good stability. It is commonly used to replace the Mohejin rotor core as the zero-order current Transformer in the leakage switch.
1, scrubbing utensils with soft cloth, towels as appropriate, it is forbidden to use corundum powder, sandpaper, wire brush or other friction to scrub aluminum doors and Windows surface.
2, after the cleaning of deoxygenated aluminum alloy profiles, it is best to use high-quality paint to protect the wax on the anode oxidation film, but also can be evenly sprayed with a layer of acrylic grease.
3, the aluminum alloy profile is strictly forbidden to loose the vehicle at the time of shipment, causing injuries.
4, according to the use of the environment, aluminum alloy doors and Windows should be cleaned regularly.
When the surface of aluminum profile is eroded and contaminated, it is necessary to clean it in a timely manner. The scale can be first cleaned with soft cloth and then washed with clean water.
6, should use lube or neutral cleaning agent warm water cleaning, not use acid or alkaline cleaning agent.